Concrete Volume Calculator
Use this free concrete volume calculator to quickly estimate the amount of concrete needed for your project. Enter dimensions like length, width, and depth to get accurate results in cubic yards or cubic feet, making it ideal for slabs, footings, foundations, and construction planning.
1 cubic yard = 27 cubic feet · 60-lb bag ≈ 0.45 cu ft · 80-lb bag ≈ 0.60 cu ft · Ready-mix is more economical above ~1 cu yd · Always add 10% overage before ordering
How Does the Concrete Volume Calculator Work?
This calculator converts your project dimensions into cubic yards of concrete — the unit used for ready-mix ordering — and also tells you how many 60-lb or 80-lb bags you need for smaller pours. It handles four common shapes: rectangular slabs and footings, round columns (using tube form diameter), walls, and stairs.
Unlike our full concrete material calculator which covers rebar, forming, and finishing, this tool focuses on a single question: how much concrete do I need? It outputs cubic yards for ready-mix delivery and bag counts for hand-mixed small jobs, with a built-in overage factor to prevent running short mid-pour.
Ordering exactly the calculated volume and running short mid-pour is the most common and costly concrete mistake. Once a pour begins, you cannot stop — the concrete already placed will begin to cure. If the truck runs dry, you're stuck with a cold joint (a weak plane between old and new concrete) that may require demolition and replacement. Always order 10% more than your calculated volume. The extra cost of a little leftover concrete is nothing compared to a failed pour.
Bags vs Ready-Mix Concrete — Which to Use?
| Volume | Best Option | Why | Cost Range |
|---|---|---|---|
| Under 0.5 cu yd | Bagged concrete | No minimum delivery; mix at your pace | $5–$8/60-lb bag |
| 0.5 – 1 cu yd | Either | Bagged is flexible; ready-mix faster | Bags ~$200–$400; Mix ~$150–$250+delivery |
| 1 – 3 cu yd | Ready-mix | Short-load fee applies but worth it | $200–$600 + short-load fee |
| Over 3 cu yd | Ready-mix | Cost-effective, consistent mix, faster pour | $130–$170/cu yd (2026) |
Most ready-mix companies have a minimum load of 1–3 cubic yards. If you order less than the minimum, you pay a "short-load" surcharge of $50–$150. For loads under 1 cubic yard, bagged concrete is almost always more economical once the short-load fee is factored in. For larger pours, ready-mix is not only cheaper but produces a more consistent mix and allows a faster, uninterrupted pour — critical for structural applications and hot-weather pours where concrete sets quickly.
Concrete Mix & Strength Guide
| Mix / PSI | Common Bag Type | Best For | Min Thickness |
|---|---|---|---|
| 2,500 PSI | Standard mix | Sidewalks, patios, non-structural slabs | 4" |
| 3,000 PSI | Quikrete 80-lb | Driveways, garage floors, footings | 4" |
| 4,000 PSI | High-strength mix | Structural slabs, heavy vehicle areas, columns | 4" |
| 5,000 PSI | Fiber-reinforced / commercial | Industrial floors, bridge decks, precast | 4" |
| Fast-setting | Quikrete Fast-Setting | Post holes, fence posts — no mixing required | N/A |
| Self-leveling | Underlayment mix | Floor leveling overlays — poured thin | ¼"–2" |
IRC requires 3,500 PSI for garage floors exposed to deicing salts; 2,500 PSI minimum for interior slabs. Driveways subject to freeze-thaw cycles should use 4,000 PSI with air entrainment. Always use at least #4 rebar on 18" centers or welded wire mesh for any slab larger than 100 sq ft — concrete is strong in compression but weak in tension, and reinforcement prevents cracking from ground movement and thermal expansion.
Example Calculations
Example 1 — Backyard Patio Slab
Volume = 12 × 16 × (4/12) = 12 × 16 × 0.333 = 64 cu ft
64 ÷ 27 = 2.37 cubic yards
Add 10% overage: 2.37 × 1.10 = 2.6 cu yd → order 3 cu yd ready-mix
Example 2 — Fence Post Footings (bags)
Volume per post = π × (5/12)² × 3 = 3.14159 × 0.1736 × 3 = 1.636 cu ft
8 posts × 1.636 = 13.09 cu ft total
13.09 ÷ 27 = 0.485 cu yd → use bags
80-lb bags: 13.09 ÷ 0.60 = 22 bags (add 10% = 25 bags)
Example 3 — Garage Floor Slab
Volume = 24 × 24 × (6/12) = 24 × 24 × 0.5 = 288 cu ft
288 ÷ 27 = 10.67 cubic yards
Add 10%: 10.67 × 1.10 = 11.7 → order 12 cu yd ready-mix
At $150/cu yd: ~$1,800 materials (plus pump truck if needed)